|
Eco Fingerprint Reader |
|
| OVERVIEW |
|
| TECHNICAL SPECIFICATIONS |
| First start running the device |
: |
When the first energy given to the device the red led light switch on along 2 seconds and the buzzer make a sound consecutively. |
| Authorized finger recognition |
: |
Closer the magnet to the left side surface. Buzzer will sounding in 250ms and green LED light switch on. The device get through the recognition mode. The finger is placed over the sensor to be granted privileges. Finger will be removed and place over again with every short sound of the device. This process is repeated 3 times after if the AUTHORIZED FINGER recognition will be successfull the buzzer will make a long sound and green LED light switch on. If you fail the buzzer is sounding shortly in 2 times and the red LED light switch on. Only 1 AUTHORIZED FINGER will be recognized. |
| User finger recognition |
: |
At first AUTHORIZED FINGER will put over the sensor than USER FINGER will put over the sensor for recognition. Finger will be removed and place over again with every short sound of the device. This process is repeated 3 times after if the USER FINGER recognition will be successfull the buzzer will make a long sound and green LED light switch on. If you fail the buzzer is sounding shortly in 2 times and the red LED light switch on The recorded number of fingers of the data length varies according to the records. Minimum 250 records are kept. |
| Deletion of recognized finger |
: |
Closer the magnet to the left side surface. Buzzer will sounding in 250ms and green LED light switch on. The device get through the comparison mode. In the meantime, if you read AUTHORIZED FINGER the device delete all tracks in memory that back to the factory settings. |
| Operate the device normally |
: |
When put the finger on the sensor device get through the comparison mode.
a- If the Sensor is active but did not put the compared finger or compared finger is absent in the memory than buzzer is sounding shortly 2 times and red LED light switch on.
b- If no finger print in to the memory of module than the buzzer is sounding shortly 2 times and red LED light switch on than green LED light switch on just in 1 second and switch off.
c- If compared finger is exist in the memory and is AUTHORIZED FINGER the red LED light switch on in 1 sec and turns off light than get thorough the recognition mode.
d- If you have encountered finger is exist in the memory but is not the AUTHORIZED FINGER than only the green LED light switch on, at the same time the buzzer will sounding longer in 1 time and the relay takes. |
| Cable connections |
: |
1 Red 9-12 VDC
2 Brown GND
3 White Relay Out
4 Yellow Relay Out
5 Green Relay Out |
|
